Thursday (Today)

  1. OV7670 Camera Module x1
  2. GY-521 Board / MPU6050 x1
  3. DC to DC Booster x1
  4. B3 Lithium Polymer (LiPo) Battery Charger for 2S-3S Lipo x1
  5. Camera Plate x1
    [Test before accepting]
  6. TFT Deisplay x1
    [Test before accepting]
  7. Robot Link 1
  8. Robot Link 2A
  9. Robot Link 2B
  10. Servo MG996R 180 Degree x1
    [with partial horn set, as we mounted one horn on Link1]
  11. Servo MG996R 180 Degree x1
    [with partial horn set, as we mounted one hoen on Link2A]
    [This motor is mounted on Link 1 as M2]
  12. Servo MG996R 180 Degree x1
    [with full horn set] Extra Motor
  13. Servo MG90 180 Degree x1
    [with partial horn set, as we mounted one horn on Link2B]

Friday

  1. USB Cable for ESP32 and Robot with special 2-Pin Connector
  2. PCA9685 16 channel 12 Fm + I2C bus servo PWM controller (with 5-pin and 2-pin connector]
  3. Hand Made EM driver circuit with 6-pin berg connector and 4-pin-wired connector)
  4. Electromagent : Iron Core + Coil + Laser + 4pin connector
  5. Arena Top Plate [Pine wood + White colour] x1
  6. Arena Bottom Plate (with coloured strips and two nut bolts) x1
  7. Berg Strip Male (2cm Long pins) 40 pin x? (approx 5-6)
  8. Berg Strip Female 40 pin x? (approx 3-5)
  9. Rotatory Switch with Knob
  10. Prototyping wire 2meter x2 colour

Saturday

  1. Raspberry Pi Pico WiFi x1

Notes:-

  1. Buzzer: Add a buzzer to your PCA PCB (Blue PCB) [Already provided to you]
  2. Single Digit Alphanumeric [Cancelled item, removed from list, Price=Rs0]
  3. Solder Wire (if pending)
  4. Radio volume control (if pending)
  5. Metal Studs (spacers) remains pending.
  6. Problem (almost cancelled): Aluminum Servo Horn/Arm 25T Round type Disc MG995 MG996 x2
Happy Holidays